We recently had new service installed. We received WAN/LAN information from the ISP. Both are public IP Ranges. The WAN is a /30 IP which we configured our Pfsense router to. If I configure a lan port with a locally configured IP (192.168.1.1), we have connectivity. However, we requested a /28 range from the ISP which they gave us as the LAN information. I'm assuming I can configure another router and setup the LAN port on the first router with the information provided by the ISP and configure the 2nd router with the WAN configured to one of those /28 public IP Addresses they gave us. I will need an additional router for this scenario. Is there a way to route these addresses in a single PFSense router?
↧