I just tried to insert a PfSense box into my network and I seem to have broken something in the process. Need some outside help to point out any errors I might have missed. The setup was working before inserting the PfSense box.
Network map summary:
Internet Edge Router PfSense Switch End Machine
Routes set up as follows:
ER:
1. 192.168.2.0/24 - x.x.x.14 (pfsense WAN ip)
2. 192.168.5.0/24 - x.x.x.14 (pfsense WAN ip)
PfSense:
1. 192.168.2.0/24 - 172.16.1.2 (switch LAN ip)
2. 192.168.5.0/24 - 172.16.1.2 (switch LAN ip)
3. Default gateway as x.x.x.1 (gateway of ER, same subnet as pfsense WAN ip)
Switch:
1. 192.168.2.0/24 is the default VLAN (interface 2/1) with routing enabled
2. 192.168.5.0/24 is a VLAN (interface 2/2) with routing enabled
3. Default gateway as 172.16.1.1 (pfsense LAN ip)
Running traceroute to a 192.168.5.x...