Issue:
I'm having an issue with a video encoder that I've set up behind my firewall reaching our decoder which is set up on a public IP.The encoder sends a UDP stream to the decoder on port 4444. I've tested the encoder on one of our other public IP's and it streams just fine when not behind our firewall, so I know there's some sort of configuration issue on my firewall end.
Basic layout of where the aforementioned devices sit on our network:
Internet <-> Switch <-> pfSense<-> Switch <-> Encoder
Internet <-> Switch <-> Decoder
Firewall rules on WAN
Rules on LAN
I've run packet captures on the pfsense, and it only detects traffic for the encoder and decoder on the LAN interface. There's no traffic for either device on the WAN interface. However, I've tried pinging the decoder from my laptop (also on the LAN network) and all the traffic is properly NAT'd and...
<-><-><-><-><-><->