I recently setup PFsense to run my network as a router, i have setup a secondary network for IOT and smart home devices. I have Ubiquiti APs for broadcasting the Wifi networks. My main network works with no issue, its when i setup the secondary network nothing works. The "Tech" network has a VLAN of 2 in the "Ubiquiti Networks" and VLAN 2 is setup in PFsense (on the same NIC that my main network runs off of). I have set an allow rule for the "Tech" network with no restriction so traffic can go anywhere.
When i try and use the WIFI network I don't get an IP address or anything, i even tried to set one of the ports on my ubiquiti 5 port switch to the "Tech" network to see if that worked, nothing. Same issue if i set my ip static, i cant reach the gateway or ping any address on the WAN, i get a transmit error.
I have the gateway set as...